Threaded 2" ABS Plug | For Pre-2020 Spaboy

The 2" ABS Threaded Plug for Pre-2020 Spaboy is a replacement plug fitting for the salt cell housing on Arctic Spas built before 2020. The plug seals the housing port when the salt cell isn't installed, when the spa is being winterized, or when you're testing system pressure during a service call.

When you'll need a new plug: Replace when the existing plug is cracked, the threads have stripped, or the seal at the base is leaking. Plugs are cheap insurance against a slow drip behind the cabinet panel.

Will this fit my spa? Yes, on Arctic Spas built before 2020 with the Spaboy salt cell housing using the 2" ABS thread standard. If your spa is 2020 or newer, you need the 1.5" Threaded Lippert Plug (CMP) instead. The matching grate is the 2" Threaded Lippert Grate (Pre-2020). Bring the old plug to one of our three Ontario showrooms for matching if you're not sure of the spec.

How to install: Drain the spa below the housing port. Unscrew the existing plug, clean the seating threads, apply Teflon tape to the new plug threads, and hand-tighten — never use a wrench on a plastic spa fitting.